Description
HIGH-PURITY SPECIALTY INGREDIENT
NMN (beta-Nicotinamide mononucleotide)
NMN (beta-nicotinamide mononucleotide) is supplied at 99.0% as a high-purity B2B raw material for further processing and development work. Purity is released by HPLC against a batch-specific COA, with the beta anomer and the residual solvent profile reported per batch. The material is hygroscopic and should be held sealed, cool, dry and away from light. Regulatory status differs by market and this material is not a finished consumer product.
COA-Backed Specification
| Identity | NMN (beta-Nicotinamide mononucleotide) |
|---|---|
| Form and colour | Fine white crystalline powder |
| Assay | 99.0% |
| Method | HPLC |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=5.0% |
| Ash | <=5.0% |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Representative batch | LXGZ260418 |
| Manufacture date | 18 Apr 2026 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Buyers approving NMN (beta-Nicotinamide mononucleotide) normally agree four points before the first order: the assay method and acceptance range, the identity and isomeric form, the residual solvent limits applicable to the destination market, and the physical form required by the buyer’s process. Confirm these at enquiry stage so the shipment is released to the right specification.
- Assay: 99.0% by HPLC, released batch by batch against the current COA.
- Identity: confirmed by the analytical methods stated in the specification table above.
- Residual solvents and heavy metals: reported per batch and reviewed against the destination market’s limits.
- Physical form: powder as standard; packaging and particle size agreed against the buyer’s process.
- Documentation: COA, specification sheet and safety data sheet accompany each shipment.
- Regulatory status, permitted uses and labelling requirements are the buyer’s responsibility for the destination market.
How This Grade Differs
NMN (beta-Nicotinamide mononucleotide) is often quoted alongside materials of the same or a closely related name at a different purity or in a different form. The two are not interchangeable: purity, residual solvent profile and physical form all change the buyer’s processing yield. Compare quotations on the released assay and the reported impurity profile, not on the headline percentage alone.
Compare these related grades before approval:
For a substitution review, compare botanical identity, plant part, assay target, analytical method, physical form and the current offered-batch COA.
Application Areas
- Hard capsules and two-piece capsule filling
- Stick packs and single-serve sachets
- Powder blends and dry mixes
- Beverage and liquid concentrate systems, subject to the buyer’s process validation
Packaging and Delivery
- Evaluation sample typically 10-20 g, subject to stock
- Regular MOQ typically 1 kg
- 1 kg foil bag or 25 kg fibre drum with inner food-grade liner
- Custom packing and private-label options subject to confirmation
- Typical lead time 7-15 working days after deposit
Quality and Documentation
Representative batch LXGZ260418 supports the specification table above. Use the cited record for preliminary comparison and request the offered-lot COA for final technical approval. Batch COA, specification sheet, agreed third-party testing and export documents are available for buyer verification.
Frequently Asked Questions
What do you declare for moisture and ash?
Both are released against the limits on the approved specification; the measured result for your lot appears on its COA.
How recent is the representative batch shown?
The batch referenced is LXGZ260418; your shipment is released on its own certificate rather than the representative one.
How is appearance checked?
Fine white crystalline powder, compared against a retained sample from the approved batch.
How long can we hold stock before use?
Two years when stored properly from the manufacture date when the pack stays sealed and dry.
Which specification figure should the purchase order reference for NMN Powder 99%?
The figure 99.0%, measured by HPLC.
Can I review the COA before I pay?
Yes. Request the current or representative COA and check identity, method, limits and results before approving the purchase order.
How is the material shipped?
Air and sea freight are both arranged, with the mode chosen against volume, destination and required date. Documents and the HS code are issued with the shipping instructions.
What is the usual lead time?
Regular production normally takes 7-15 working days after deposit, depending on stock, volume, testing and customisation requirements.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
Get the current batch COA, a sample or a quotation
Specification comparison: Before comparing this grade with a conventional or liposomal-labelled form, review our liposomal versus conventional active buyer guide. It explains which identity, active-content basis and composition questions to put in your purchasing brief.
