Description
COA-BACKED BOTANICAL INGREDIENT
Euryale ferox Seed Extract
Euryale Seed Extract Powder 10:1 is supplied for B2B formulation as a defined aquatic-plant seed ingredient in dry powder form.
COA-Backed Specification
| Botanical identity | Euryale ferox |
|---|---|
| Plant part | Seed |
| Form and colour | Fine off-white powder |
| Assay | Extract ratio 10:1 by TLC; complies |
| Method | TLC |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=5.0% |
| Ash | <=5.0% |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Representative batch | LXQS260522 |
| Manufacture date | 22 May 2026 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Euryale is specified by seed identity and ratio. Because the seed is starch-rich, confirm dispersion, moisture limits and carrier system before approving the specification.
- Confirm species and seed part
- Check starch-related dispersion behaviour
- Compare moisture and ash limits
- Confirm the grade is not a lotus seed substitute
How This Grade Differs
Euryale ferox seed is distinct from lotus seed and from other aquatic seed materials in starch profile and colour. Specifying species and plant part keeps the definition comparable between lots.
Compare these related grades before approval:
For a substitution review, compare botanical identity, plant part, assay target, analytical method, physical form and the current offered-batch COA.
Application Areas
- Grain-based beverage powders
- Supplement and nutritional blends
- Functional food bases
- Private-label projects
Packaging and Delivery
- Evaluation sample typically 10-20 g, subject to stock
- Regular MOQ typically 1 kg
- 1 kg foil bag or 25 kg fibre drum with inner food-grade liner
- Custom packing and private-label options subject to confirmation
- Typical lead time 7-15 working days after deposit
Quality and Documentation
Representative batch LXQS260522 supports the specification table above. Use the cited record for preliminary comparison and request the offered-lot COA for final technical approval. Batch COA, specification sheet, agreed third-party testing and export documents are available for buyer verification.
Frequently Asked Questions
Which impurity limits are declared?
Moisture and ash are held within the approved specification limits, with heavy metals and microbiology tested on every lot.
What is the declared source material for this grade?
Euryale ferox, as recorded on the specification and the batch certificate.
Is the mesh size fixed or adjustable?
Standard supply is 98% through 80 mesh, and alternative cuts can be agreed in the written specification.
Does the percentage refer to one compound or to a group?
It refers to Extract ratio 10:1 by TLC; complies, calculated by TLC on the basis stated on the COA.
How should the material be stored after arrival?
Two years when stored properly. Keep the pack sealed; moisture uptake is the main risk for this grade.
What is the usual lead time?
Regular production normally takes 7-15 working days after deposit, depending on stock, volume, testing and customisation requirements.
Can I review the COA before I pay?
Yes. Request the current or representative COA and check identity, method, limits and results before approving the purchase order.
What packing options are available?
Standard packing is a sealed food-grade inner liner inside an export carton or fibre drum. Pack size, labelling and private-label artwork are agreed in the written specification.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
Get the current batch COA, a sample or a quotation
