Description
STANDARDISED BOTANICAL EXTRACT
Bletilla striata (Thunb.) Rchb.f. — 10:1 extract ratio
白芨 is a ratio extract, which means the quotation has to state the input grade and the extraction solvent before the 10:1 extract ratio figure carries any meaning.
COA-Backed Specification
| Identity | Bletilla striata (Thunb.) Rchb.f. |
|---|---|
| Plant part | Rhizome |
| Form and colour | Off-white to light brown powder |
| Assay | 10:1 extract ratio |
| Method | TLC |
| Particle size | 98% through 80 mesh |
| Loss on drying | Within the limits of the approved specification |
| Ash | Within the limits of the approved specification |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Shelf life | Two years when stored properly |
Limits shown are the agreed specification. Result values are issued on the batch-specific certificate of analysis.
Buyer Decision Guide
Confirm the input material grade and the solvent. A ratio without those two facts cannot be compared between suppliers.
- Assay / grade: 10:1 extract ratio, tested by TLC.
- Identity: Bletilla striata (Thunb.) Rchb.f., Rhizome.
- Appearance: off-white to light brown powder.
- Confirm solubility in the intended formulation with the supplier before scaling.
- Packing and storage: sealed food-grade liner in an export carton or fibre drum; keep cool and dry.
- Documentation: COA, specification sheet and SDS issued with each batch.
How This Grade Differs
No grade of this product was listed on the site before this page, so it introduces the product directly. Confirm the grade in the written quotation before the first order.
Quality and Documentation
Released on a batch certificate covering assay or grade, identity, moisture, heavy metals and microbiology.
Frequently Asked Questions
Can you supply a specimen for identity verification?
A retained sample is kept for each lot and the identity is stated as Bletilla striata.
How recent is the representative batch shown?
The batch referenced is issued per lot; your shipment is released on its own certificate rather than the representative one.
Which safety parameters are tested every lot?
Moisture per specification, ash per specification, heavy metals and microbiology against the approved specification.
How should the material be stored after arrival?
Two years when stored properly. Keep the pack sealed; moisture uptake is the main risk for this grade.
Does the percentage refer to one compound or to a group?
It refers to 10:1 extract ratio, calculated by TLC on the basis stated on the COA.
Can you produce to our own specification or packing?
Alternative assay targets, particle size, packing and private-label requirements are reviewed case by case, subject to production feasibility and a revised written specification.
What is the minimum order quantity?
The regular MOQ is typically 1 kg. An evaluation sample of 10-20 g can usually be arranged before a formal order, subject to stock.
How is the material shipped?
Air and sea freight are both arranged, with the mode chosen against volume, destination and required date. Documents and the HS code are issued with the shipping instructions.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
Get the current batch COA, a sample or a quotation
