Description
MARINE-DERIVED INGREDIENT
Abalone whole-body powder — Purity >=80%
Abalone whole-body powder is supplied as a Fine cream to light-tan powder B2B ingredient for further processing. Produced by our audited marine-ingredient partner facility and supplied under LongBio batch documentation. Batch identity, specification and COA are matched across the quotation.
COA-Backed Specification
| Identity | Haliotis discus hannai (Pacific abalone) |
|---|---|
| Form and colour | Fine cream to light-tan powder |
| Assay | Purity >=80% |
| Method | Kjeldahl and gravimetric |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=5.0% |
| Ash | <=5.0% |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Representative batch | LXHY260612 |
| Manufacture date | 12 Jun 2026 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Specify Abalone whole-body powder by the declared basis, the delivered form and the certificate of analysis. For this grade the basis is Purity >=80% and the delivered form is Fine cream to light-tan powder. Confirm the destination market requirements, the intended use category and the required documentation before approval. This material is offered as an industrial raw material for further processing, not as a finished consumer product, and no health or medical claim is made.
- Declared basis and delivered form stated on the specification
- Documentation supplied: batch COA, specification sheet and agreed third-party testing
- Species and origin stated on the certificate; substitution requires written confirmation
- Destination market and intended use to be confirmed at quotation stage
- Samples available for evaluation against your own process
How This Grade Differs
Abalone whole-body powder is listed as Haliotis discus hannai with a purity grade of >=80%. The page does not define the analyte or calculation basis behind that claim; confirm it against the approved specification and current batch COA before comparing with the 50%-60% whole-body or extract grades.
Compare these related grades before approval:
For a substitution review, compare marine species, whole-body or extracted fraction, the defined assay target and basis, analytical method, physical form and the current offered-batch COA.
Application Areas
- Hard capsules and two-piece capsule filling
- Stick packs and single-serve sachets
- Powder blends and dry mixes
- Beverage and liquid concentrate systems, subject to the buyer’s process validation
Packaging and Delivery
- Evaluation sample typically 10-20 g, subject to stock
- Regular MOQ typically 1 kg
- 1 kg foil bag or 25 kg fibre drum with inner food-grade liner
- Custom packing and private-label options subject to confirmation
- Typical lead time 7-15 working days after deposit
Quality and Documentation
Representative batch LXHY260612 supports the specification table above. Use the cited record for preliminary comparison and request the offered-lot COA for final technical approval. Batch COA, specification sheet, agreed third-party testing and export documents are available for buyer verification.
Frequently Asked Questions
Which impurity limits are declared?
Moisture and ash are held within the approved specification limits, with heavy metals and microbiology tested on every lot.
Which test method should our QC lab expect to reproduce?
Kjeldahl and gravimetric, with the reference standard and calculation basis recorded on the batch certificate.
Which plant part is Abalone Whole-Body Powder 80%+ produced from?
The plant part declared on the specification is stated on the specification.
How is lot traceability handled?
Each lot keeps batch records and a retained sample, and the certificate for LXHY260612 carries the same batch reference used in the quotation.
What shelf life and storage conditions apply?
Two years when stored properly, kept sealed in a dry place away from light and heat.
Can I review the COA before I pay?
Yes. Request the current or representative COA and check identity, method, limits and results before approving the purchase order.
Can you produce to our own specification or packing?
Alternative assay targets, particle size, packing and private-label requirements are reviewed case by case, subject to production feasibility and a revised written specification.
Can I get a sample before placing the order?
Yes. An evaluation sample is normally available before a formal order. Sample quantity, courier account and destination are confirmed at the time of request.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
Get the current batch COA, a sample or a quotation
