Description
MARINE-DERIVED INGREDIENT
Abalone whole-body powder — Purity 50%-60%
Abalone whole-body powder is supplied as a Fine pale cream to light-beige powder B2B ingredient for further processing. Produced by our audited marine-ingredient partner facility and supplied under LongBio batch documentation. Batch identity, specification and COA are matched across the quotation.
COA-Backed Specification
| Identity | Haliotis discus hannai (Pacific abalone) |
|---|---|
| Form and colour | Fine pale cream to light-beige powder |
| Assay | Purity 50%-60% |
| Method | Kjeldahl and gravimetric |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=5.0% |
| Ash | <=5.0% |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Representative batch | LXHY260611 |
| Manufacture date | 11 Jun 2026 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Specify Abalone whole-body powder by the declared basis, the delivered form and the certificate of analysis. For this grade the basis is Purity 50%-60% and the delivered form is Fine pale cream to light-beige powder. Confirm the destination market requirements, the intended use category and the required documentation before approval. This material is offered as an industrial raw material for further processing, not as a finished consumer product, and no health or medical claim is made.
- Declared basis and delivered form stated on the specification
- Documentation supplied: batch COA, specification sheet and agreed third-party testing
- Species and origin stated on the certificate; substitution requires written confirmation
- Destination market and intended use to be confirmed at quotation stage
- Samples available for evaluation against your own process
How This Grade Differs
Abalone whole-body powder is listed as Haliotis discus hannai with a 50%-60% purity grade. The page does not define the analyte or basis behind that purity range; confirm it against the approved specification and current batch COA before comparing with the 80%+ whole-body, peptide or extract products.
Compare these related grades before approval:
For a substitution review, compare marine species, whole-body or extracted fraction, the defined assay target and basis, analytical method, physical form and the current offered-batch COA.
Application Areas
- Hard capsules and two-piece capsule filling
- Stick packs and single-serve sachets
- Powder blends and dry mixes
- Beverage and liquid concentrate systems, subject to the buyer’s process validation
Packaging and Delivery
- Evaluation sample typically 10-20 g, subject to stock
- Regular MOQ typically 1 kg
- 1 kg foil bag or 25 kg fibre drum with inner food-grade liner
- Custom packing and private-label options subject to confirmation
- Typical lead time 7-15 working days after deposit
Quality and Documentation
Representative batch LXHY260611 supports the specification table above. Use the cited record for preliminary comparison and request the offered-lot COA for final technical approval. Batch COA, specification sheet, agreed third-party testing and export documents are available for buyer verification.
Frequently Asked Questions
How does the material behave in your process?
It is supplied as Fine pale cream to light-beige powder at 98% through 80 mesh, so bulk density and flow are confirmed against your process before the first order.
How recent is the representative batch shown?
The batch referenced is LXHY260611; your shipment is released on its own certificate rather than the representative one.
How is Abalone Whole-Body Powder 50%-60% quantified?
By Kjeldahl and gravimetric against the specification figure of Purity 50%-60%.
What shelf life and storage conditions apply?
Two years when stored properly, kept sealed in a dry place away from light and heat.
Which plant part is Abalone Whole-Body Powder 50%-60% produced from?
The plant part declared on the specification is stated on the specification.
Which documents come with the shipment?
Batch COA, specification sheet, agreed third-party testing where required, commercial invoice, packing list, certificate of origin and transport documents. The exact set is confirmed against the product and destination market.
What is the usual lead time?
Regular production normally takes 7-15 working days after deposit, depending on stock, volume, testing and customisation requirements.
What is the minimum order quantity?
The regular MOQ is typically 1 kg. An evaluation sample of 10-20 g can usually be arranged before a formal order, subject to stock.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
Get the current batch COA, a sample or a quotation
