Description
COA-BACKED BOTANICAL INGREDIENT
Chenopodium quinoa Willd. Aboveground part Extract
Quinoa Whole Powder is presented for B2B ingredient qualification using representative batch evidence and batch-specific analytical language.
COA-Backed Specification
| Botanical identity | Chenopodium quinoa Willd. |
|---|---|
| Plant part | Aboveground part |
| Form and colour | Fine light-yellow powder |
| Assay | Identity and physical specification; result complies |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=12.0%; result 10.74% |
| Ash | <=8.0%; result 6.69% |
| Representative batch | LXLM 210507 |
| Manufacture date | 7 May 2021 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Compare this botanical powder by identity, plant part, particle characteristics and batch quality; concentrated extracts require a separate approval.
- Evaluation sample typically 10-20 g
- Regular MOQ typically 1 kg
- Typical lead time 7-15 working days
How This Grade Differs
Quinoa Whole Powder is qualified using botanical identity: Chenopodium quinoa Willd.; plant part: Aboveground part; offered grade: Identity and physical specification; result complies. Its purchasing definition is a botanical powder with identity and physical criteria, not an extract concentration.
Compare these related grades before approval:
For a substitution review, compare botanical identity, plant part, assay target, analytical method, physical form and the current offered-batch COA.
Quality and Documentation
Representative batch LXLM 210507 supports the specification table above. Current lot evidence and buyer-defined verification govern acceptance of the commercial shipment.
BUYER QUALIFICATION SNAPSHOT
Quinoa Whole Powder: What to Match Before Ordering
This page describes a defined ingredient grade. Use the fields below to prevent substitution between raw powder, ratio extract and standardised grades. The quotation, approved specification and current shipment COA should identify the same material.
| Botanical identity | Chenopodium quinoa Willd. |
|---|---|
| Plant part | Aboveground part |
| Assay | Identity and physical specification; result complies |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=12.0%; result 10.74% |
| Representative batch | LXLM 210507 |
Confirm botanical source and plant part.
Match ratio or assay and its test method.
Review the current offered-batch COA.
Continue with Standardized Botanical Extracts, the grade comparison guide, or the COA review checklist.
Frequently Asked Questions
What specification defines Quinoa Whole Powder?
For Quinoa Whole Powder: Identity and physical specification; result complies.
What establishes the botanical source?
For Quinoa Whole Powder: Qualification starts with Chenopodium quinoa Willd., Aboveground part. The product name alone is not sufficient when species, plant part or grade differs.
What evidence is needed for the offered lot?
For Quinoa Whole Powder: The page cites representative batch LXLM 210507. The sample, quotation and shipment COA should be traceable to the grade actually offered.
Should the COA be reviewed before sample approval?
For Quinoa Whole Powder: Yes. The commercial review should use the COA for the lot being offered, together with the matching quotation and specification.
Which quality data should be checked together?
For Quinoa Whole Powder: Review identity and Identity and physical specification; result complies together with the listed physical tests and applicable contaminant and microbiological limits.
How should buyers confirm supply timing?
For Quinoa Whole Powder: Commercial timing is finalised after quantity, packaging, document set and any additional testing have been agreed.
Can particle size or pack format be adjusted?
For Quinoa Whole Powder: Application-specific requests require technical review. Approved changes should be documented rather than treated as an informal substitution.
Reviews
There are no reviews yet.