Description
WHOLE PLANT POWDER
Smallanthus sonchifolius (Poepp.) H.Rob. — Whole root powder (no assay)
雪莲果粉 is a whole-material powder with no extraction step, so there is no assay to compare. Buyers decide on particle size, moisture and microbial load instead.
COA-Backed Specification
| Identity | Smallanthus sonchifolius (Poepp.) H.Rob. |
|---|---|
| Plant part | Root tuber |
| Form and colour | Light cream powder |
| Assay | Whole root powder (no assay) |
| Method | Identity and microbiology per batch |
| Particle size | 98% through 80 mesh |
| Loss on drying | Within the limits of the approved specification |
| Ash | Within the limits of the approved specification |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Shelf life | Two years when stored properly |
Limits shown are the agreed specification. Result values are issued on the batch-specific certificate of analysis.
Buyer Decision Guide
Confirm mesh size, moisture and whether a carrier was added. Whole powders are often cut with carrier without saying so.
- Assay / grade: Whole root powder (no assay), tested by Identity and microbiology per batch.
- Identity: Smallanthus sonchifolius (Poepp.) H.Rob., Root tuber.
- Appearance: light cream powder.
- Dispersible in water but not soluble; expect sediment without a stabiliser.
- Packing and storage: sealed food-grade liner in an export carton or fibre drum; keep cool and dry.
- Documentation: COA, specification sheet and SDS issued with each batch.
How This Grade Differs
No whole-material powder of this product was listed on the site before this page. This is a powder, not an extract: there is no ratio and no assay to quote.
Quality and Documentation
Released on a batch certificate covering assay or grade, identity, moisture, heavy metals and microbiology.
Frequently Asked Questions
What physical form does Yacon Root Powder ship in?
Light cream powder, milled to 98% through 80 mesh.
Which impurity limits are declared?
Moisture and ash are held within the approved specification limits, with heavy metals and microbiology tested on every lot.
Which batch is the quotation based on?
A representative batch is named on the quotation; the lot you receive is released on its own certificate.
How should the material be stored after arrival?
Two years when stored properly. Keep the pack sealed; moisture uptake is the main risk for this grade.
Is the mesh size fixed or adjustable?
Standard supply is 98% through 80 mesh, and alternative cuts can be agreed in the written specification.
What is the usual lead time?
Regular production normally takes 7-15 working days after deposit, depending on stock, volume, testing and customisation requirements.
Can you produce to our own specification or packing?
Alternative assay targets, particle size, packing and private-label requirements are reviewed case by case, subject to production feasibility and a revised written specification.
Can I review the COA before I pay?
Yes. Request the current or representative COA and check identity, method, limits and results before approving the purchase order.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
Get the current batch COA, a sample or a quotation
