Description
STANDARDISED BOTANICAL EXTRACT
Peganum harmala L. Seed Extract
Peganum harmala seed extract is offered in two commercial forms and the difference is written into the quotation rather than implied on the page: a 10:1 ratio grade declared on plant input, or an alkaloid-standardised grade declared on harmine and harmaline content by HPLC. The two cannot be compared on price per kilogram, so the grade is fixed before the quotation is issued.
COA-Backed Specification
| Identity | Peganum harmala L. |
|---|---|
| Plant part | Seed |
| Form and colour | Fine brown to dark-brown powder |
| Assay | Agreed per order: 10:1 ratio or alkaloid-standardised |
| Method | HPLC for alkaloid-standardised grades; ratio grade declared on input |
| Marker alkaloids | Harmine and harmaline, reported when an alkaloid grade is ordered |
| Particle size | 98% through 80 mesh |
| Loss on drying | Within the limits of the approved specification |
| Ash | Within the limits of the approved specification |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Shelf life | Two years when stored properly |
Limits shown are the agreed specification. Result values are issued on the batch-specific certificate of analysis.
Buyer Decision Guide
This is a material where the specification should be written before the price is discussed. Three points determine what you are actually buying.
- Grade basis: ratio (plant input) or alkaloid-standardised (HPLC), stated in the quotation.
- For alkaloid grades, harmine and harmaline reported separately rather than as a single total.
- Identity confirmed as Peganum harmala seed, not whole-herb or root material.
- Particle size, loss on drying and heavy metals reported per batch.
- Destination-market status reviewed before shipment; documentation prepared to the buyer’s requirement.
- COA, specification sheet and safety data sheet accompany each shipment.
How This Grade Differs
Because the catalogue carries no other Peganum grade, this page covers both the ratio and the alkaloid-standardised form. The specification is agreed in writing per order so the COA and the quotation always describe the same material.
Quality and Documentation
Ratio grades are declared on plant input with the extraction batch recorded. Alkaloid grades are assayed by HPLC with harmine and harmaline integrated separately, and the result carried onto the certificate for that lot.
Regulatory Note
Peganum harmala contains harmala alkaloids, which are controlled or restricted in a number of destination markets. This material is supplied as a botanical extract for industrial and research use, not as a food, supplement or pharmaceutical finished product. Regulatory status, import licensing, permitted uses and labelling are the buyer’s responsibility for the destination market.
Frequently Asked Questions
What specification defines Peganum Harmala Seed Extract Powder?
Agreed per order: 10:1 ratio or alkaloid-standardised, tested by HPLC for alkaloid-standardised grades; ratio grade declared on input.
How is this grade positioned against the other forms offered?
Because the catalogue carries no other Peganum grade, this page covers both the ratio and the alkaloid-standardised form. The specification is agreed in writing per order so the COA and the quotation always describe the same material.
What must the certificate of analysis report for this product?
Grade basis: ratio (plant input) or alkaloid-standardised (HPLC), stated in the quotation. For alkaloid grades, harmine and harmaline reported separately rather than as a single total. Identity confirmed as Peganum harmala seed, not whole-herb or root material.
What should a buyer confirm before the first order?
This is a material where the specification should be written before the price is discussed. Three points determine what you are actually buying.
Are you a manufacturer or a trading company?
LongBio is Shaanxi Longsheng Biotechnology Co., Ltd., a direct manufacturer of botanical extracts and functional ingredients integrating R&D, production and export support. Factory review can be arranged by video or an on-site visit.
Can I request the current batch COA before ordering?
Yes. Request the applicable current or representative COA and compare product identity, method, limits and results before approving a purchase order.
What is the minimum order quantity?
The regular MOQ is typically 1 kg. An evaluation sample of 10-20 g can usually be arranged before a formal order, subject to stock.
Do you support custom specifications or packing?
Alternative assay targets, particle size, packing and private-label requirements can be reviewed case by case, subject to production feasibility and a revised written specification.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
Get the current batch COA, a sample or a quotation
