Description
COA-BACKED BOTANICAL INGREDIENT
Cynomorium songaricum Alcohol-soluble Extract
Alcohol-soluble Cynomorium extract is supplied as a dried 10:1 preparation of Cynomorium songaricum stem, standardised to the alcohol-soluble fraction. Because the fraction extracted is defined by the solvent, the delivered colour, taste and solubility differ from a water-only preparation of the same plant, and the specification should be read with that in mind. It is a botanical raw material for further processing and is not a finished consumer product.
COA-Backed Specification
| Botanical identity | Cynomorium songaricum |
|---|---|
| Plant part | Stem |
| Form and colour | Fine reddish-brown powder |
| Assay | Extract ratio 10:1 by TLC; alcohol-soluble fraction |
| Method | TLC |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=5.0%; result 3.70% |
| Ash | <=5.0%; result 2.70% |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Representative batch | LXSY260401 |
| Manufacture date | 1 Apr 2026 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Approving an alcohol-soluble extract means agreeing the extraction solvent, the ratio basis and the solubility behaviour in the buyer’s own system. Confirm the ratio and its analytical basis on the certificate of analysis, and confirm how the material behaves in the intended carrier before approving a grade.
- Ratio basis and analytical method stated on the certificate of analysis
- Solvent fraction confirmed: alcohol-soluble, not water-soluble
- Colour, taste and solubility agreed against the buyer’s carrier
- Particle size and packing agreed at quotation
- COA, specification sheet and safety data sheet accompany each shipment
- Regulatory status, permitted uses and labelling are the buyer’s responsibility for the destination market
How This Grade Differs
The same plant is offered as water extracts, alcohol extracts and standardised marker extracts, and they are not interchangeable. An alcohol-soluble 10:1 preparation carries a different fraction and a different solubility profile from the water-soluble material sold under the same plant name.
For a substitution review, compare botanical identity, plant part, assay target, analytical method, physical form and the current offered-batch COA.
Application Areas
- Hard capsules and two-piece capsule filling
- Stick packs and single-serve sachets
- Traditional formula powders and dry blends
- Tincture and liquid systems, subject to the buyer process validation
Packaging and Delivery
- Evaluation sample typically 10-20 g, subject to stock
- Regular MOQ typically 1 kg
- 1 kg foil bag or 25 kg fibre drum with inner food-grade liner
- Custom packing and private-label options subject to confirmation
- Typical lead time 7-15 working days after deposit
Quality and Documentation
Representative batch LXSY260401 supports the specification table above. Use the cited record for preliminary comparison and request the offered-lot COA for final technical approval. Batch COA, specification sheet, agreed third-party testing and export documents are available for buyer verification.
Frequently Asked Questions
What specification defines Alcohol-soluble Cynomorium Extract?
For Alcohol-soluble Cynomorium Extract: Extract ratio 10:1 by TLC; alcohol-soluble fraction, tested by TLC.
Which identity details must remain consistent?
For Alcohol-soluble Cynomorium Extract: match Cynomorium songaricum and plant part Stem across the quotation, specification and offered-batch COA. The offered grade is Extract ratio 10:1 by TLC; alcohol-soluble fraction.
How is batch-specific approval completed?
For Alcohol-soluble Cynomorium Extract: the page cites representative batch LXSY260401. Final approval requires the current lot’s identity, specification results and relevant dates.
What forms part of the technical review?
For Alcohol-soluble Cynomorium Extract: do not assess Extract ratio 10:1 by TLC; alcohol-soluble fraction in isolation; particle size, moisture or drying data and market-relevant safety limits can also affect acceptance.
Are you a manufacturer or a trading company?
LongBio is Shaanxi Longsheng Biotechnology Co., Ltd., a direct manufacturer of botanical extracts and functional ingredients integrating R&D, production and export support. Factory review can be arranged by video or an on-site visit.
Can I request the current batch COA before ordering?
Yes. Request the applicable current or representative COA and compare product identity, method, limits and results before approving a purchase order.
What is the minimum order quantity?
The regular MOQ is typically 1 kg. An evaluation sample of 10-20 g can usually be arranged before a formal order, subject to stock.
Do you support custom specifications or packing?
Alternative assay targets, particle size, packing and private-label requirements can be reviewed case by case, subject to production feasibility and a revised written specification.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
