Description
STANDARDISED BOTANICAL ACTIVE
Loganin and morroniside — Loganin + morroniside total 98.0%
Loganin and morroniside is supplied as a standardised single-compound botanical active isolated from cornus fruit, released at Loganin + morroniside total 98.0% by HPLC against a batch-specific certificate of analysis. The purchasing definition is the molecule and its declared purity rather than a plant-ratio extract, so the specification is agreed on assay, identity and impurity profile.
COA-Backed Specification
| Identity | Loganin and morroniside |
|---|---|
| Form and colour | Fine white to pale yellow crystalline powder |
| Assay | Loganin + morroniside total 98.0% |
| Method | HPLC |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=5.0%; result 4.10% |
| Ash | <=5.0%; result 4.20% |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Representative batch | LXML260605 |
| Manufacture date | 5 Jun 2026 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Buyers approving Loganin and morroniside usually settle three points before the first order: the assay method and acceptance range, the identity of the compound as distinct from a same-named plant extract, and the physical form the buyer’s process needs. Loganin and morroniside is offered at Loganin + morroniside total 98.0% by HPLC. Confirm those three against your own specification so the delivered batch is released to the right grade.
- Combined assay: total loganin and morroniside 98.0% by HPLC.
- Ratio of the two iridoids stated on the certificate of analysis.
- Identity confirmed against reference standards where required.
- Physical form and particle size agreed against the buyer’s process.
- COA, specification sheet and safety data sheet accompany each shipment.
- Regulatory status, permitted uses and labelling are the buyer’s responsibility for the destination market.
How This Grade Differs
Loganin and morroniside is frequently quoted alongside a botanical extract of the same plant. The extract is standardised to a ratio or to a minimum marker content, while Loganin and morroniside is a single purified compound at Loganin + morroniside total 98.0%. The two are not interchangeable: dosing calculations, solubility and the analytical method used to release them all differ. Compare quotations on the declared assay and method, not on the plant name.
For a substitution review, compare botanical identity, plant part, assay target, analytical method, physical form and the current offered-batch COA.
Application Areas
- Hard capsules and two-piece capsule filling
- Stick packs and single-serve sachets
- Powder blends and dry mixes
- Beverage and liquid concentrate systems, subject to the buyer’s process validation
Packaging and Delivery
- Evaluation sample typically 10-20 g, subject to stock
- Regular MOQ typically 1 kg
- 1 kg foil bag or 25 kg fibre drum with inner food-grade liner
- Custom packing and private-label options subject to confirmation
- Typical lead time 7-15 working days after deposit
Quality and Documentation
Representative batch LXML260605 supports the specification table above. Use the cited record for preliminary comparison and request the offered-lot COA for final technical approval. Batch COA, specification sheet, agreed third-party testing and export documents are available for buyer verification.
Frequently Asked Questions
What specification defines Loganin and Morroniside Powder 98%?
For Loganin and Morroniside Powder 98%: Loganin + morroniside total 98.0%, tested by HPLC.
Which identity details must remain consistent?
For Loganin and Morroniside Powder 98%: match Loganin and morroniside across the quotation, specification and offered-batch COA. The offered grade is Loganin + morroniside total 98.0%.
How is batch-specific approval completed?
For Loganin and Morroniside Powder 98%: the page cites representative batch LXML260605. Final approval requires the current lot’s identity, specification results and relevant dates.
What forms part of the technical review?
For Loganin and Morroniside Powder 98%: do not assess Loganin + morroniside total 98.0% in isolation; particle size, moisture or drying data and market-relevant safety limits can also affect acceptance.
Are you a manufacturer or a trading company?
LongBio is Shaanxi Longsheng Biotechnology Co., Ltd., a direct manufacturer of botanical extracts and functional ingredients integrating R&D, production and export support. Factory review can be arranged by video or an on-site visit.
Can I request the current batch COA before ordering?
Yes. Request the applicable current or representative COA and compare product identity, method, limits and results before approving a purchase order.
What is the minimum order quantity?
The regular MOQ is typically 1 kg. An evaluation sample of 10-20 g can usually be arranged before a formal order, subject to stock.
Do you support custom specifications or packing?
Alternative assay targets, particle size, packing and private-label requirements can be reviewed case by case, subject to production feasibility and a revised written specification.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
