Description
MARINE-DERIVED INGREDIENT
Sea cucumber whole-body powder — Purity 50%-60%
Sea cucumber whole-body powder is supplied as a Fine pale brown to grey-brown powder B2B ingredient for further processing. Produced by our audited marine-ingredient partner facility and supplied under LongBio batch documentation. Batch identity, specification and COA are matched across the quotation.
COA-Backed Specification
| Identity | Apostichopus japonicus |
|---|---|
| Form and colour | Fine pale brown to grey-brown powder |
| Assay | Purity 50%-60% |
| Method | Kjeldahl and gravimetric |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=5.0% |
| Ash | <=5.0% |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Representative batch | LXHY260527 |
| Manufacture date | 27 May 2026 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Specify Sea cucumber whole-body powder by the declared basis, the delivered form and the certificate of analysis. For this grade the basis is Purity 50%-60% and the delivered form is Fine pale brown to grey-brown powder. Confirm the destination market requirements, the intended use category and the required documentation before approval. This material is offered as an industrial raw material for further processing, not as a finished consumer product, and no health or medical claim is made.
- Declared basis and delivered form stated on the specification
- Documentation supplied: batch COA, specification sheet and agreed third-party testing
- Species and origin stated on the certificate; substitution requires written confirmation
- Destination market and intended use to be confirmed at quotation stage
- Samples available for evaluation against your own process
How This Grade Differs
Sea cucumber whole-body powder is listed as Apostichopus japonicus with a 50%-60% purity grade. The page does not define the analyte or basis behind that purity range; confirm it against the approved specification and current batch COA before comparing with the 80%+ whole-body, peptide or polysaccharide products.
Compare these related grades before approval:
- Sea Cucumber Whole-Body Powder 80%+
- Sea Cucumber Peptide Powder
- Sea Cucumber Polysaccharide Powder 60
For a substitution review, compare marine species, whole-body or extracted fraction, the defined assay target and basis, analytical method, physical form and the current offered-batch COA.
Application Areas
- Hard capsules and two-piece capsule filling
- Stick packs and single-serve sachets
- Powder blends and dry mixes
- Beverage and liquid concentrate systems, subject to the buyer’s process validation
Packaging and Delivery
- Evaluation sample typically 10-20 g, subject to stock
- Regular MOQ typically 1 kg
- 1 kg foil bag or 25 kg fibre drum with inner food-grade liner
- Custom packing and private-label options subject to confirmation
- Typical lead time 7-15 working days after deposit
Quality and Documentation
Representative batch LXHY260527 supports the specification table above. Use the cited record for preliminary comparison and request the offered-lot COA for final technical approval. Batch COA, specification sheet, agreed third-party testing and export documents are available for buyer verification.
Frequently Asked Questions
How long can we hold stock before use?
Two years when stored properly from the manufacture date when the pack stays sealed and dry.
Can the COA be matched to the lot you ship?
Yes. The certificate is issued for the shipped lot, which is the batch LXHY260527 referenced on the specification.
Which safety parameters are tested every lot?
Moisture <=5.0%; result 3.90%, ash <=5.0%; result 4.40%, heavy metals and microbiology against the approved specification.
Which botanical identity is declared for Sea Cucumber Whole-Body Powder 50%-60%?
It is declared as Apostichopus japonicus.
Which specification figure should the purchase order reference for Sea Cucumber Whole-Body Powder 50%-60%?
The figure Purity 50%-60%, measured by Kjeldahl and gravimetric.
Can I review the COA before I pay?
Yes. Request the current or representative COA and check identity, method, limits and results before approving the purchase order.
What is the usual lead time?
Regular production normally takes 7-15 working days after deposit, depending on stock, volume, testing and customisation requirements.
Can you produce to our own specification or packing?
Alternative assay targets, particle size, packing and private-label requirements are reviewed case by case, subject to production feasibility and a revised written specification.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
Get the current batch COA, a sample or a quotation
