Description
COA-BACKED BOTANICAL INGREDIENT
Lepidium meyenii Walp. Root Extract
Maca Root Extract Powder 10:1 is presented for B2B ingredient qualification using representative batch evidence and batch-specific analytical language.
COA-Backed Specification
| Botanical identity | Lepidium meyenii Walp. |
|---|---|
| Plant part | Root |
| Form and colour | Fine yellow-brown powder |
| Assay | Extract ratio 10:1; complies |
| Particle size | 100% through 80 mesh |
| Loss on drying | <=5.0%; result 3.76% |
| Ash | <=5.0%; result 3.89% |
| Representative batch | LXMK210521 |
| Manufacture date | 21 May 2021 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Compare this Extract ratio 10:1; complies ratio grade by botanical identity, plant part and physical specification; the ratio is not an active-marker percentage.
- Evaluation sample typically 10-20 g
- Regular MOQ typically 1 kg
- Typical lead time 7-15 working days
How This Grade Differs
Maca Root Extract Powder 10:1 is qualified using botanical identity: Lepidium meyenii Walp.; plant part: Root; offered grade: Extract ratio 10:1; complies. Its purchasing definition is the stated ratio grade (Extract ratio 10:1; complies), not a guaranteed active-compound concentration.
Compare these related grades before approval:
For a substitution review, compare botanical identity, plant part, assay target, analytical method, physical form and the current offered-batch COA.
Quality and Documentation
Representative batch LXMK210521 supports the specification table above. Confirm current batch results before release; the representative record remains supporting context rather than a shipment guarantee.
Maca Root Extract Powder 10:1 Qualification Snapshot
This snapshot is taken from the specification evidence displayed on this page. Confirm that the quotation, specification and current offered-batch COA describe the same grade before approval.
| Botanical identity | Lepidium meyenii Walp. |
|---|---|
| Plant part | Root |
| Assay | Extract ratio 10:1; complies |
| Particle size | 100% through 80 mesh |
| Loss on drying | <=5.0%; result 3.76% |
Three Checks Before Ordering
- Match botanical identity and plant part.
- Match assay target, unit and analytical method.
- Review the current batch data and destination-market documents.
Continue with Standardized Botanical Extracts, the COA review checklist, or the specification comparison guide.
Frequently Asked Questions
What specification defines Maca Root Extract Powder 10:1?
For Maca Root Extract Powder 10:1: Extract ratio 10:1; complies.
What botanical details should buyers match?
For Maca Root Extract Powder 10:1: Use Lepidium meyenii Walp., Root as the identity checkpoint, then confirm that the sample and commercial documents describe the same material.
Which batch document controls shipment approval?
For Maca Root Extract Powder 10:1: The page cites representative batch LXMK210521. Use it as an example of the tested grade, not as the release record for a future shipment.
When should buyers request the current COA?
For Maca Root Extract Powder 10:1: Request the current COA before issuing approval so the offered lot can be checked against the agreed identity, grade and limits.
Which controls should be reviewed for this grade?
For Maca Root Extract Powder 10:1: Technical acceptance should cover identity, grade-defining data, physical quality and the safety tests required for the intended market.
What supply details require quotation-stage confirmation?
For Maca Root Extract Powder 10:1: The quotation should state the applicable MOQ, pack format and lead time after current inventory and testing needs are reviewed.
Can selected physical attributes be discussed?
For Maca Root Extract Powder 10:1: Discuss pack format and relevant physical parameters before quotation; feasibility and any MOQ effect are confirmed for the exact request.
Reviews
There are no reviews yet.