Konjac Tuber Extract Powder 4:1

Amorphophallus rivieri Tuber extract; Extract ratio 4:1; result complies, supported by representative batch LXMY210104.

Category:

Description

COA-BACKED BOTANICAL INGREDIENT

Amorphophallus rivieri Tuber Extract

Konjac Tuber Extract Powder 4:1 is presented for B2B ingredient qualification using representative batch evidence and batch-specific analytical language.

Konjac Tuber Extract Powder 4:1 source image

COA-Backed Specification

Botanical identity Amorphophallus rivieri
Plant part Tuber
Form and colour Fine yellow-brown powder
Assay Extract ratio 4:1; result complies
Particle size 98% through 80 mesh
Loss on drying <=5.0%; result 4.20%
Ash <=5.0%; result 4.11%
Representative batch LXMY210104
Manufacture date 4 January 2021
Shelf life Two years when stored properly

Representative values do not replace the current shipment COA.

Konjac Tuber Extract Powder 4:1 applications image

Buyer Decision Guide

Compare this Extract ratio 4:1; result complies ratio grade by botanical identity, plant part and physical specification; the ratio is not an active-marker percentage.

  • Evaluation sample typically 10-20 g
  • Regular MOQ typically 1 kg
  • Typical lead time 7-15 working days
Konjac Tuber Extract Powder 4:1 quality image

How This Grade Differs

Konjac Tuber Extract Powder 4:1 is qualified using botanical identity: Amorphophallus rivieri; plant part: Tuber; offered grade: Extract ratio 4:1; result complies. Its purchasing definition is the stated ratio grade (Extract ratio 4:1; result complies), not a guaranteed active-compound concentration.

When an alternative to Konjac Tuber Extract Powder 4:1 is required, compare it against this page’s identity, grade and batch-document requirements.

Browse ingredients related to Konjac Tuber Extract Powder 4:1

For a Konjac Tuber Extract Powder 4:1 substitution review, match botanical identity, plant part, grade-defining assay or ratio, analytical basis, physical form and offered-lot documentation.

Quality and Documentation

Representative batch LXMY210104 supports the specification table above. Confirm current batch results before release; the representative record remains supporting context rather than a shipment guarantee.

BUYER QUALIFICATION SNAPSHOT

Konjac Tuber Extract Powder 4:1: What to Match Before Ordering

This page describes a defined ingredient grade. Use the fields below to prevent substitution between raw powder, ratio extract and standardised grades. The quotation, approved specification and current shipment COA should identify the same material.

Botanical identity Amorphophallus rivieri
Plant part Tuber
Assay Extract ratio 4:1; result complies
Particle size 98% through 80 mesh
Loss on drying <=5.0%; result 4.20%
Representative batch LXMY210104
1 · Identity
Confirm botanical source and plant part.
2 · Grade
Match ratio or assay and its test method.
3 · Batch
Review the current offered-batch COA.

Continue with Standardized Botanical Extracts, the grade comparison guide, or the COA review checklist.

Frequently Asked Questions

What specification defines Konjac Tuber Extract Powder 4:1?

For Konjac Tuber Extract Powder 4:1: Extract ratio 4:1; result complies.

How can buyers avoid a plant-part substitution?

For Konjac Tuber Extract Powder 4:1: Use Amorphophallus rivieri, Tuber as the identity checkpoint, then confirm that the sample and commercial documents describe the same material.

Does the example batch replace shipment testing?

For Konjac Tuber Extract Powder 4:1: The page cites representative batch LXMY210104. Use it as an example of the tested grade, not as the release record for a future shipment.

How is the current COA used in purchasing?

For Konjac Tuber Extract Powder 4:1: Request the current COA before issuing approval so the offered lot can be checked against the agreed identity, grade and limits.

What should buyers compare beyond the headline assay?

For Konjac Tuber Extract Powder 4:1: Technical acceptance should cover identity, grade-defining data, physical quality and the safety tests required for the intended market.

Do stock and testing affect the lead time?

For Konjac Tuber Extract Powder 4:1: The quotation should state the applicable MOQ, pack format and lead time after current inventory and testing needs are reviewed.

How are custom packing requests evaluated?

For Konjac Tuber Extract Powder 4:1: Discuss pack format and relevant physical parameters before quotation; feasibility and any MOQ effect are confirmed for the exact request.

Request COA, Sample or Quotation

Contact LongBio

Reviews

There are no reviews yet.

Be the first to review “Konjac Tuber Extract Powder 4:1”

Your email address will not be published. Required fields are marked *