Description
COA-BACKED BOTANICAL INGREDIENT
Ulmus pumila L. Bark Extract
Red Elm Bark Powder is presented for B2B ingredient qualification using representative batch evidence and batch-specific analytical language.
COA-Backed Specification
| Botanical identity | Ulmus pumila L. |
|---|---|
| Plant part | Bark |
| Form and colour | Fine red-brown powder |
| Assay | Identity and physical specification; result complies |
| Particle size | 98% through 8 mesh (as stated on COA) |
| Loss on drying | <=12.0%; result 8.65% |
| Ash | <=8.0%; result 6.71% |
| Representative batch | LXCYSP200310 |
| Manufacture date | 10 March 2020 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Compare this botanical powder by identity, plant part, particle characteristics and batch quality; concentrated extracts require a separate approval.
- Evaluation sample typically 10-20 g
- Regular MOQ typically 1 kg
- Typical lead time 7-15 working days
How This Grade Differs
Red Elm Bark Powder is qualified using botanical identity: Ulmus pumila L.; plant part: Bark; offered grade: Identity and physical specification; result complies. Its purchasing definition is a botanical powder with identity and physical criteria, not an extract concentration.
When an alternative to Red Elm Bark Powder is required, compare it against this page’s identity, grade and batch-document requirements.
Browse ingredients related to Red Elm Bark Powder
For a Red Elm Bark Powder substitution review, match botanical identity, plant part, grade-defining assay or ratio, analytical basis, physical form and offered-lot documentation.
Quality and Documentation
Representative batch LXCYSP200310 supports the specification table above. Use the cited record for preliminary comparison and request the offered-lot COA for final technical approval.
BUYER QUALIFICATION SNAPSHOT
Red Elm Bark Powder: What to Match Before Ordering
This page describes a defined ingredient grade. Use the fields below to prevent substitution between raw powder, ratio extract and standardised grades. The quotation, approved specification and current shipment COA should identify the same material.
| Botanical identity | Ulmus pumila L. |
|---|---|
| Plant part | Bark |
| Assay | Identity and physical specification; result complies |
| Particle size | 98% through 8 mesh (as stated on COA) |
| Loss on drying | <=12.0%; result 8.65% |
| Representative batch | LXCYSP200310 |
Confirm botanical source and plant part.
Match ratio or assay and its test method.
Review the current offered-batch COA.
Continue with Standardized Botanical Extracts, the grade comparison guide, or the COA review checklist.
Frequently Asked Questions
What specification defines Red Elm Bark Powder?
For Red Elm Bark Powder: Identity and physical specification; result complies.
Which source and plant-part details matter?
For Red Elm Bark Powder: Match Ulmus pumila L., Bark across the quotation, specification and offered-batch COA. This is compared as a botanical powder, so identity, plant part and physical properties carry particular weight.
What is the role of the representative COA?
For Red Elm Bark Powder: The page cites representative batch LXCYSP200310. Final approval requires the current lot's identity, specification results and relevant dates.
What COA should accompany commercial approval?
For Red Elm Bark Powder: Current batch documentation should be reviewed before purchase; a representative document is useful for screening but does not release a shipment.
How should analytical and physical limits be assessed?
For Red Elm Bark Powder: Do not assess Identity and physical specification; result complies in isolation; particle size, moisture or drying data and market-relevant safety limits can also affect acceptance.
What determines MOQ and lead time for this grade?
For Red Elm Bark Powder: Confirm MOQ and timing on the live quotation because stock position, testing, packing and destination requirements can change both.
Can packing or physical parameters be reviewed?
For Red Elm Bark Powder: Alternative packing or selected parameters may be considered case by case, subject to production feasibility and a revised written specification.
Reviews
There are no reviews yet.