Description
COA-BACKED BOTANICAL INGREDIENT
Chrysanthemum morifolium Flower Extract
Chrysanthemum Flower Powder is presented for B2B ingredient qualification using representative batch evidence and batch-specific analytical language.
COA-Backed Specification
| Botanical identity | Chrysanthemum morifolium |
|---|---|
| Plant part | Flower |
| Form and colour | Fine light-yellow powder |
| Assay | Identity and physical specification; result complies |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=12.0%; result 9.77% |
| Ash | <=8.0%; result 6.45% |
| Representative batch | LXJH241010 |
| Manufacture date | 11 October 2024 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Compare this botanical powder by identity, plant part, particle characteristics and batch quality; concentrated extracts require a separate approval.
- Evaluation sample typically 10-20 g
- Regular MOQ typically 1 kg
- Typical lead time 7-15 working days
How This Grade Differs
Chrysanthemum Flower Powder is qualified using botanical identity: Chrysanthemum morifolium; plant part: Flower; offered grade: Identity and physical specification; result complies. Its purchasing definition is a botanical powder with identity and physical criteria, not an extract concentration.
Compare these related grades before approval:
For a substitution review, compare botanical identity, plant part, assay target, analytical method, physical form and the current offered-batch COA.
Quality and Documentation
Representative batch LXJH241010 supports the specification table above. The shipment decision should rely on the current lot documentation and any independent verification required by the buyer.
BUYER QUALIFICATION SNAPSHOT
Chrysanthemum Flower Powder: What to Match Before Ordering
This page describes a defined ingredient grade. Use the fields below to prevent substitution between raw powder, ratio extract and standardised grades. The quotation, approved specification and current shipment COA should identify the same material.
| Botanical identity | Chrysanthemum morifolium |
|---|---|
| Plant part | Flower |
| Assay | Identity and physical specification; result complies |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=12.0%; result 9.77% |
| Representative batch | LXJH241010 |
Confirm botanical source and plant part.
Match ratio or assay and its test method.
Review the current offered-batch COA.
Continue with Standardized Botanical Extracts, the grade comparison guide, or the COA review checklist.
Frequently Asked Questions
What specification defines Chrysanthemum Flower Powder?
For Chrysanthemum Flower Powder: Identity and physical specification; result complies.
Which identity fields belong on the purchase specification?
For Chrysanthemum Flower Powder: The source specification is Chrysanthemum morifolium, Flower. Reject substitutions that change the species or stated plant part without a revised approval.
What does the cited batch record demonstrate?
For Chrysanthemum Flower Powder: The page cites representative batch LXJH241010. It supports preliminary review, while the COA issued for the offered shipment lot controls commercial acceptance.
Can the offered-batch COA be reviewed before ordering?
For Chrysanthemum Flower Powder: Ask for the offered-lot COA at qualification stage and confirm that its product name, batch number and results match the purchasing file.
Which specification fields require confirmation?
For Chrysanthemum Flower Powder: Compare every stated limit with the intended application and destination-market requirements, then document any additional tests in the order specification.
How are packing and testing reflected in timing?
For Chrysanthemum Flower Powder: Order quantity and dispatch timing are grade-specific; reconfirm them when the specification and delivery destination are known.
How are changes kept consistent across documents?
For Chrysanthemum Flower Powder: Selected packing and physical requirements can be assessed, but an accepted change must appear consistently in the quotation, specification and COA.
Reviews
There are no reviews yet.