Description
PHOSPHOLIPID INGREDIENT
Phosphatidylserine Powder 20%
Phosphatidylserine powder is supplied standardised to a declared phosphatidylserine content of 20.0% on a food-grade carrier, released against a batch-specific certificate of analysis. The source of the phospholipid and the carrier are both part of the specification, because they carry a labelling consequence and affect dispersibility. It is an ingredient for further processing and is not a finished consumer product.
COA-Backed Specification
| Ingredient system | Phosphatidylserine (on carrier) |
|---|---|
| Form and colour | Fine light yellow to cream powder |
| Assay | Phosphatidylserine 20.0% |
| Method | HPLC |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=5.0%; result 3.90% |
| Ash | <=5.0%; result 2.50% |
| Source | Stated on the specification and the certificate of analysis |
| Carrier | Declared for label purposes |
| Dispersibility | Confirmed against the buyer’s carrier system |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Representative batch | LXPS260603 |
| Manufacture date | 3 Jun 2026 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Agree the phosphatidylserine figure, the analytical method, the source and the carrier before approval. Confirm the source for allergen and label purposes, and confirm the dispersibility of the powder in the buyer’s carrier system.
- Phosphatidylserine: 20.0%, released against the batch COA.
- Source stated for allergen and label purposes.
- Carrier declared on the specification.
- Dispersibility confirmed against the buyer’s process.
- COA, specification sheet and safety data sheet accompany each shipment.
- Regulatory status, permitted uses and labelling are the buyer’s responsibility for the destination market.
How This Grade Differs
Phosphatidylserine is offered at 20%, 50% and 70%, and from different sources. Content, source and carrier all differ between grades, and a 20% material is not a drop-in replacement for a higher-content grade. Compare quotations on the declared content, the source and the method used to release it.
For a substitution review, compare botanical identity, plant part, assay target, analytical method, physical form and the current offered-batch COA.
Application Areas
- Hard capsules and two-piece capsule filling
- Powder blends and dry mixes
- Functional food and beverage systems
- Tablet systems, subject to the buyer process validation
Packaging and Delivery
- Evaluation sample typically 10-20 g, subject to stock
- Regular MOQ typically 1 kg
- 1 kg foil bag or 25 kg fibre drum with inner food-grade liner
- Custom packing and private-label options subject to confirmation
- Typical lead time 7-15 working days after deposit
Quality and Documentation
Representative batch LXPS260603 supports the specification table above. Use the cited record for preliminary comparison and request the offered-lot COA for final technical approval. Batch COA, specification sheet, agreed third-party testing and export documents are available for buyer verification.
Frequently Asked Questions
What specification defines Phosphatidylserine Powder 20%?
For Phosphatidylserine Powder 20%: Phosphatidylserine 20.0%, tested by HPLC.
Which identity details must remain consistent?
For Phosphatidylserine Powder 20%: match Phosphatidylserine (on carrier) across the quotation, specification and offered-batch COA. The offered grade is Phosphatidylserine 20.0%.
How is batch-specific approval completed?
For Phosphatidylserine Powder 20%: the page cites representative batch LXPS260603. Final approval requires the current lot’s identity, specification results and relevant dates.
What forms part of the technical review?
For Phosphatidylserine Powder 20%: do not assess Phosphatidylserine 20.0% in isolation; particle size, moisture or drying data and market-relevant safety limits can also affect acceptance.
Are you a manufacturer or a trading company?
LongBio is Shaanxi Longsheng Biotechnology Co., Ltd., a direct manufacturer of botanical extracts and functional ingredients integrating R&D, production and export support. Factory review can be arranged by video or an on-site visit.
Can I request the current batch COA before ordering?
Yes. Request the applicable current or representative COA and compare product identity, method, limits and results before approving a purchase order.
What is the minimum order quantity?
The regular MOQ is typically 1 kg. An evaluation sample of 10-20 g can usually be arranged before a formal order, subject to stock.
Do you support custom specifications or packing?
Alternative assay targets, particle size, packing and private-label requirements can be reviewed case by case, subject to production feasibility and a revised written specification.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
