Description
HIGH-PURITY SPECIALTY INGREDIENT
ATP Disodium Salt Powder 98%
ATP is supplied as the disodium salt at 98.0% by HPLC, released against a batch-specific certificate of analysis. The salt form and the hydration state are part of the identity of this grade, because both affect the assay calculation and the handling. The material is hygroscopic and degrades in warm or humid conditions, so the storage statement should be read with the specification. It is an industrial raw material, not a finished consumer product.
COA-Backed Specification
| Identity | Adenosine 5′-triphosphate disodium salt |
|---|---|
| Form and colour | Fine white to off-white crystalline powder |
| Assay | 98.0% |
| Method | HPLC |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=5.0%; result 4.60% |
| Ash | <=5.0%; result 4.10% |
| Water content | Reported per batch; assay basis stated on the certificate |
| Hygroscopicity | Hygroscopic; keep sealed, cool and dry |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Representative batch | LXCZ260522 |
| Manufacture date | 22 May 2026 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Agree the assay basis, the salt form, the water content and the packing before approval. Confirm whether the buyer’s specification is written on the anhydrous or the as-is basis, because the same material reports a different figure on each and the two cannot be compared directly.
- Assay: 98.0% by HPLC, with the basis stated on the certificate.
- Salt form confirmed: disodium salt.
- Water content and hydration state reported per batch.
- Packing and storage requirement agreed at quotation.
- COA, specification sheet and safety data sheet accompany each shipment.
- Regulatory status, permitted uses and labelling are the buyer’s responsibility for the destination market.
How This Grade Differs
ATP is offered as the disodium salt and as other salts, and at different hydration levels. Salt form and hydration both change the assay figure and the handling, so grades are not interchangeable on a like-for-like weight basis. Confirm the basis of the assay before comparing quotations.
For a substitution review, compare botanical identity, plant part, assay target, analytical method, physical form and the current offered-batch COA.
Application Areas
- Hard capsules and two-piece capsule filling
- Stick packs and single-serve sachets
- Dry blends and premix manufacturing
- Development and reference work
Packaging and Delivery
- Evaluation sample typically 10-20 g, subject to stock
- Regular MOQ typically 1 kg
- 1 kg foil bag or 25 kg fibre drum with inner food-grade liner
- Custom packing and private-label options subject to confirmation
- Typical lead time 7-15 working days after deposit
Quality and Documentation
Representative batch LXCZ260522 supports the specification table above. Use the cited record for preliminary comparison and request the offered-lot COA for final technical approval. Batch COA, specification sheet, agreed third-party testing and export documents are available for buyer verification.
Frequently Asked Questions
What specification defines ATP Disodium Salt Powder 98%?
For ATP Disodium Salt Powder 98%: 98.0%, tested by HPLC.
Which identity details must remain consistent?
For ATP Disodium Salt Powder 98%: match Adenosine 5′-triphosphate disodium salt across the quotation, specification and offered-batch COA. The offered grade is 98.0%.
How is batch-specific approval completed?
For ATP Disodium Salt Powder 98%: the page cites representative batch LXCZ260522. Final approval requires the current lot’s identity, specification results and relevant dates.
What forms part of the technical review?
For ATP Disodium Salt Powder 98%: do not assess 98.0% in isolation; particle size, moisture or drying data and market-relevant safety limits can also affect acceptance.
Are you a manufacturer or a trading company?
LongBio is Shaanxi Longsheng Biotechnology Co., Ltd., a direct manufacturer of botanical extracts and functional ingredients integrating R&D, production and export support. Factory review can be arranged by video or an on-site visit.
Can I request the current batch COA before ordering?
Yes. Request the applicable current or representative COA and compare product identity, method, limits and results before approving a purchase order.
What is the minimum order quantity?
The regular MOQ is typically 1 kg. An evaluation sample of 10-20 g can usually be arranged before a formal order, subject to stock.
Do you support custom specifications or packing?
Alternative assay targets, particle size, packing and private-label requirements can be reviewed case by case, subject to production feasibility and a revised written specification.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
