Description
MARINE-DERIVED INGREDIENT
Sea cucumber extract concentrate — Concentration 10% on solid basis
Sea cucumber extract concentrate is supplied as a Clear to slightly opalescent light-brown liquid B2B ingredient for further processing. Produced by our audited marine-ingredient partner facility and supplied under LongBio batch documentation. Batch identity, specification and COA are matched across the quotation.
COA-Backed Specification
| Identity | Apostichopus japonicus |
|---|---|
| Form and colour | Clear to slightly opalescent light-brown liquid |
| Assay | Concentration 10% on solid basis |
| Method | Refractometry and gravimetric |
| Solid content | 10% +/-1% |
| Appearance | Clear to slightly opalescent liquid |
| pH (as supplied) | Within the approved specification range |
| Density | Within the approved specification range |
| Preservation | No preservative added unless agreed in writing |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Representative batch | LXHY260520 |
| Manufacture date | 20 May 2026 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Specify Sea cucumber extract concentrate by the declared basis, the delivered form and the certificate of analysis. For this grade the basis is Concentration 10% on solid basis and the delivered form is Clear to slightly opalescent light-brown liquid. Confirm the destination market requirements, the intended use category and the required documentation before approval. This material is offered as an industrial raw material for further processing, not as a finished consumer product, and no health or medical claim is made.
- Declared basis and delivered form stated on the specification
- Documentation supplied: batch COA, specification sheet and agreed third-party testing
- Species and origin stated on the certificate; substitution requires written confirmation
- Destination market and intended use to be confirmed at quotation stage
- Samples available for evaluation against your own process
How This Grade Differs
Sea Cucumber extract concentrate is listed as a liquid Apostichopus japonicus ingredient with 10% solid content measured by refractometry and gravimetry. Compare the linked 20% liquid concentrate on the same solids basis; whole-body powder is a different physical format and purchasing specification. Confirm the current batch documents before substitution.
Compare these related grades before approval:
For a substitution review, compare marine species, liquid or dry form, declared solid-content basis, analytical method and the current offered-batch COA.
Application Areas
Discuss the intended liquid formulation and processing conditions with the supplier before selecting this concentrate.
Packaging and Delivery
Request the available pack sizes, evaluation sample, minimum order quantity and lead time for the offered lot in the quotation.
Quality and Documentation
Representative batch LXHY260520 supports the specification table above. Use the cited record for preliminary comparison and request the offered-lot COA for final technical approval. Batch COA, specification sheet, agreed third-party testing and export documents are available for buyer verification.
Frequently Asked Questions
Which test method should our QC lab expect to reproduce?
Refractometry and gravimetric, with the reference standard and calculation basis recorded on the batch certificate.
What shelf life and storage conditions apply?
Two years when stored properly, kept sealed in a dry place away from light and heat.
Can the COA be matched to the lot you ship?
Yes. The certificate is issued for the shipped lot, which is the batch LXHY260520 referenced on the specification.
How does the material behave in your process?
It is supplied as Clear to slightly opalescent liquid, so handling and dosing are agreed against your line.
Which safety parameters are tested every lot?
Moisture per specification, ash per specification, heavy metals and microbiology against the approved specification.
What is the minimum order quantity?
The regular MOQ is typically 1 kg. An evaluation sample of 10-20 g can usually be arranged before a formal order, subject to stock.
How is the material shipped?
Air and sea freight are both arranged, with the mode chosen against volume, destination and required date. Documents and the HS code are issued with the shipping instructions.
Can I review the COA before I pay?
Yes. Request the current or representative COA and check identity, method, limits and results before approving the purchase order.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
Get the current batch COA, a sample or a quotation
