Description
COA-BACKED PEPTIDE INGREDIENT
Antarctic Krill Peptide from Euphausia superba
Antarctic Krill Peptide is supplied as a hydrolysed, low-molecular-weight peptide for B2B nutrition, beverage and supplement projects. Specification is defined by source material, protein content and molecular-weight distribution.
COA-Backed Specification
| Source material | Euphausia superba |
|---|---|
| Plant part | Hydrolysed krill protein peptide |
| Form and colour | Fine pink to light-tan powder |
| Assay | Protein >=80.0% on dried basis; low-molecular-weight peptide fraction |
| Method | HPLC |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=5.0% |
| Ash | <=5.0% |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Representative batch | LXNJ260215 |
| Manufacture date | 15 Feb 2026 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Peptides are specified by source, degree of hydrolysis and molecular-weight distribution. Confirm the protein content basis, the assay method and the MW cut-off, because two products described by the same name can behave very differently in solubility and taste.
- Confirm the source material declaration
- Check protein content and the assay method
- Review molecular-weight distribution data
- Confirm solubility, taste and hygroscopicity for your format
How This Grade Differs
Antarctic Krill Peptide is a hydrolysed peptide from Euphausia superba, not the intact protein and not a botanical extract of the same raw material. Compare source, degree of hydrolysis and MW distribution when substituting.
Compare these related grades before approval:
For a substitution review, compare botanical identity, plant part, assay target, analytical method, physical form and the current offered-batch COA.
Application Areas
- Protein and peptide beverage powders
- Supplement sachets and capsules
- Clinical and sports nutrition
- Private-label nutrition projects
Packaging and Delivery
- Evaluation sample typically 10-20 g, subject to stock
- Regular MOQ typically 1 kg
- 1 kg foil bag or 25 kg fibre drum with inner food-grade liner
- Custom packing and private-label options subject to confirmation
- Typical lead time 7-15 working days after deposit
Quality and Documentation
Representative batch LXNJ260215 supports the specification table above. Use the cited record for preliminary comparison and request the offered-lot COA for final technical approval. Batch COA, specification sheet, agreed third-party testing and export documents are available for buyer verification.
Frequently Asked Questions
What physical form does Antarctic Krill Peptide Powder ship in?
Fine pink to light-tan powder, milled to 98% through 80 mesh.
Which molecular weight profile applies?
The declared specification is Protein >=80.0% on dried basis; low-molecular-weight peptide fraction, and the peptide distribution is reported with the batch.
Which specification figure should the purchase order reference for Antarctic Krill Peptide Powder?
The figure Protein >=80.0% on dried basis; low-molecular-weight peptide fraction, measured by HPLC.
How should the material be stored after arrival?
Two years when stored properly. Keep the pack sealed; moisture uptake is the main risk for this grade.
How recent is the representative batch shown?
The batch referenced is LXNJ260215; your shipment is released on its own certificate rather than the representative one.
How is the material shipped?
Air and sea freight are both arranged, with the mode chosen against volume, destination and required date. Documents and the HS code are issued with the shipping instructions.
Which documents come with the shipment?
Batch COA, specification sheet, agreed third-party testing where required, commercial invoice, packing list, certificate of origin and transport documents. The exact set is confirmed against the product and destination market.
What is the minimum order quantity?
The regular MOQ is typically 1 kg. An evaluation sample of 10-20 g can usually be arranged before a formal order, subject to stock.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
Get the current batch COA, a sample or a quotation
