Description
COA-BACKED PEPTIDE INGREDIENT
Ovine Bone Collagen Peptide from Ovine bone collagen
Ovine Bone Collagen Peptide is supplied as a hydrolysed, low-molecular-weight peptide for B2B nutrition, beverage and supplement projects. Specification is defined by source material, protein content and molecular-weight distribution.
COA-Backed Specification
| Source material | Ovine bone collagen |
|---|---|
| Peptide form | Hydrolysed bone collagen peptide |
| Form and colour | Fine off-white to cream powder |
| Assay | Protein >=90.0% on dried basis; molecular weight mainly below 3,000 Da |
| Method | HPLC |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=5.0% |
| Ash | <=5.0% |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Representative batch | LXYG260402 |
| Manufacture date | 2 Apr 2026 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Peptides are specified by source, degree of hydrolysis and molecular-weight distribution. Confirm the protein content basis, the assay method and the MW cut-off, because two products described by the same name can behave very differently in solubility and taste.
- Confirm the source material declaration
- Check protein content and the assay method
- Review molecular-weight distribution data
- Confirm solubility, taste and hygroscopicity for your format
How This Grade Differs
Ovine Bone Collagen Peptide is hydrolysed from sheep bone collagen and is listed at protein >=90.0% on a dried basis, with molecular weight mainly below 3,000 Da. Its collagen source differs from the linked bone-marrow peptide; compare source and current batch specification before substitution.
Compare these related grades before approval:
For a substitution review, compare the exact ovine source tissue, dried-basis protein content, peptide specification, analytical method and the current offered-batch COA.
Application Areas
- Protein and peptide beverage powders
- Supplement sachets and capsules
- Clinical and sports nutrition
- Private-label nutrition projects
Packaging and Delivery
- Evaluation sample typically 10-20 g, subject to stock
- Regular MOQ typically 1 kg
- 1 kg foil bag or 25 kg fibre drum with inner food-grade liner
- Custom packing and private-label options subject to confirmation
- Typical lead time 7-15 working days after deposit
Quality and Documentation
Representative batch LXYG260402 supports the specification table above. Use the cited record for preliminary comparison and request the offered-lot COA for final technical approval. Batch COA, specification sheet, agreed third-party testing and export documents are available for buyer verification.
Frequently Asked Questions
Which molecular weight profile applies?
The declared specification is Protein >=90.0% on dried basis; molecular weight mainly below 3,000 Da, and the peptide distribution is reported with the batch.
What shelf life and storage conditions apply?
Two years when stored properly, kept sealed in a dry place away from light and heat.
Is the declared percentage a specification limit or a measured result?
The specification figure is Protein >=90.0% on dried basis; molecular weight mainly below 3,000 Da; the measured result for your lot is reported separately on its COA.
How recent is the representative batch shown?
The batch referenced is LXYG260402; your shipment is released on its own certificate rather than the representative one.
Which safety parameters are tested every lot?
Moisture <=5.0%; result 3.80%, ash <=5.0%; result 3.30%, heavy metals and microbiology against the approved specification.
What is the minimum order quantity?
The regular MOQ is typically 1 kg. An evaluation sample of 10-20 g can usually be arranged before a formal order, subject to stock.
How is the material shipped?
Air and sea freight are both arranged, with the mode chosen against volume, destination and required date. Documents and the HS code are issued with the shipping instructions.
Can you produce to our own specification or packing?
Alternative assay targets, particle size, packing and private-label requirements are reviewed case by case, subject to production feasibility and a revised written specification.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
Get the current batch COA, a sample or a quotation
