Description
COA-BACKED PLANT PROTEIN
Hemp Seed Protein Powder for Plant-Based Formulation
Hemp Seed Protein Powder is supplied for B2B plant-based nutrition, beverage and food projects. Specification is defined by protein content on a dry basis, process route and the physical parameters that control dispersion in your formulation.
COA-Backed Specification
| Identity | Cannabis sativa seed protein |
|---|---|
| Plant part | Seed |
| Form and colour | Fine light-green to cream powder |
| Assay | 55.0% on dry basis |
| Method | HPLC |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=5.0% |
| Ash | <=5.0% |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Representative batch | LXHM260723 |
| Manufacture date | 23 Jul 2026 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Plant proteins are specified by protein content basis (as-is or dry basis), process route (isolate, concentrate or flour), particle size and dispersibility. Confirm all four before comparing quotations from different suppliers.
- Confirm whether protein is declared as-is or on a dry basis
- Check the process route: flour, concentrate or isolate
- Review dispersibility, flavour and off-note profile
- Confirm allergen declarations for your destination market
How This Grade Differs
Hemp Seed Protein Powder differs from other plant protein sources in amino acid profile, flavour and functional behaviour, and from the isolate or concentrate form of the same raw material. Compare on protein basis and process route rather than on the ingredient name alone.
Compare these related grades before approval:
For a substitution review, compare botanical identity, plant part, assay target, analytical method, physical form and the current offered-batch COA.
Application Areas
- Plant-based protein beverages and shakes
- Protein bars and bakery applications
- Meat analogue and dairy alternative projects
- Private-label plant-based products
Packaging and Delivery
- Evaluation sample typically 10-20 g, subject to stock
- Regular MOQ typically 1 kg
- 1 kg foil bag or 25 kg fibre drum with inner food-grade liner
- Custom packing and private-label options subject to confirmation
- Typical lead time 7-15 working days after deposit
Quality and Documentation
Representative batch LXHM260723 supports the specification table above. Use the cited record for preliminary comparison and request the offered-lot COA for final technical approval. Batch COA, specification sheet, agreed third-party testing and export documents are available for buyer verification.
Frequently Asked Questions
Is the declared percentage a specification limit or a measured result?
The specification figure is 55.0% on dry basis; the measured result for your lot is reported separately on its COA.
How long can we hold stock before use?
Two years when stored properly from the manufacture date when the pack stays sealed and dry.
How is protein content expressed?
55.0% on dry basis, on the basis stated on the certificate.
Which impurity limits are declared?
Moisture and ash are held within the approved specification limits, with heavy metals and microbiology tested on every lot.
How does the material behave in your process?
It is supplied as Fine light-green to cream powder at 98% through 80 mesh, so bulk density and flow are confirmed against your process before the first order.
Can I review the COA before I pay?
Yes. Request the current or representative COA and check identity, method, limits and results before approving the purchase order.
Can I get a sample before placing the order?
Yes. An evaluation sample is normally available before a formal order. Sample quantity, courier account and destination are confirmed at the time of request.
What packing options are available?
Standard packing is a sealed food-grade inner liner inside an export carton or fibre drum. Pack size, labelling and private-label artwork are agreed in the written specification.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
Get the current batch COA, a sample or a quotation
