Vitamin B6 Powder 98%

Vitamin B6 (Pyridoxine Hydrochloride); assay 98.0%-101.0% on dried basis; supported by representative batch LXVD260317.

Category: Brand:

Description

COA-BACKED NUTRITIONAL INGREDIENT

Vitamin B6 (Pyridoxine Hydrochloride) for B2B Fortification

Vitamin B6 (Pyridoxine Hydrochloride) is supplied for B2B fortification and premix projects. Specification centres on the declared potency, the carrier system and the stability behaviour in your finished format.

Vitamin B6 Powder 98% source image

COA-Backed Specification

Identity Vitamin B6 (Pyridoxine Hydrochloride)
CAS No. 58-56-0
Form and colour Fine white crystalline powder
Assay 98.0%-101.0% on dried basis
Method HPLC
Particle size 98% through 80 mesh
Loss on drying <=5.0%
Ash <=5.0%
Heavy metals Within the limits of the approved specification
Microbiological limits Within the limits of the approved specification
Representative batch LXVD260317
Manufacture date 17 Mar 2026
Shelf life Two years when stored properly

Representative values do not replace the current shipment COA.

Vitamin B6 Powder 98% applications image

Buyer Decision Guide

Vitamin grades are specified by potency, carrier and purity, and the same vitamin name can cover several physical forms. Confirm the exact form and the analytical method before comparing quotations; overage and stability requirements are project-specific.

  • Confirm the exact physical form and carrier
  • Check declared potency and the assay method
  • Review stability and overage needs for your format
  • Confirm light, heat and oxygen sensitivity in handling
Vitamin B6 Powder 98% quality image

How This Grade Differs

Vitamin B6 (Pyridoxine Hydrochloride) must be compared on physical form, carrier and declared potency rather than on the vitamin name alone. Powder, oil, crystal and diluted forms behave differently in blending, dosing and shelf life.

Compare these related grades before approval:

For a substitution review, compare pyridoxine hydrochloride identity, the 98.0%-101.0% HPLC assay on a dried basis, crystalline powder form and the current offered-batch COA.

Application Areas

  • Vitamin premixes and dry blends
  • Tablets, capsules and softgels
  • Functional beverages and fortified foods
  • Private-label nutrition projects

Packaging and Delivery

  • Evaluation sample typically 10-20 g, subject to stock
  • Regular MOQ typically 1 kg
  • 1 kg foil bag or 25 kg fibre drum with inner food-grade liner
  • Custom packing and private-label options subject to confirmation
  • Typical lead time 7-15 working days after deposit

Quality and Documentation

Representative batch LXVD260317 supports the specification table above. Use the cited record for preliminary comparison and request the offered-lot COA for final technical approval. Batch COA, specification sheet, agreed third-party testing and export documents are available for buyer verification.

Frequently Asked Questions

Which batch is the quotation based on?

The page cites representative batch LXVD260317; the current lot’s certificate governs release.

Which safety parameters are tested every lot?

Moisture <=5.0%, ash <=5.0%, heavy metals and microbiology against the approved specification.

How is Vitamin B6 Powder 98% quantified?

By HPLC against the specification figure of 98.0%-101.0% on dried basis.

How is appearance checked?

Fine white crystalline powder, compared against a retained sample from the approved batch.

What shelf life and storage conditions apply?

Two years when stored properly, kept sealed in a dry place away from light and heat.

Can you produce to our own specification or packing?

Alternative assay targets, particle size, packing and private-label requirements are reviewed case by case, subject to production feasibility and a revised written specification.

Which documents come with the shipment?

Batch COA, specification sheet, agreed third-party testing where required, commercial invoice, packing list, certificate of origin and transport documents. The exact set is confirmed against the product and destination market.

What is the minimum order quantity?

The regular MOQ is typically 1 kg. An evaluation sample of 10-20 g can usually be arranged before a formal order, subject to stock.

Request COA, Sample or Quotation

Send your target specification, application, order quantity, destination country and required test limits.

Get the current batch COA, a sample or a quotation