Description
COA-BACKED NUTRITIONAL INGREDIENT
Coenzyme Q10 for B2B Fortification
Coenzyme Q10 is supplied for B2B fortification and premix projects. Specification centres on the declared potency, the carrier system and the stability behaviour in your finished format.
COA-Backed Specification
| Identity | Coenzyme Q10 |
|---|---|
| CAS No. | 303-98-0 |
| Form and colour | Fine yellow to orange crystalline powder |
| Assay | 98.0%-101.0% |
| Method | HPLC |
| Particle size | 98% through 80 mesh |
| Loss on drying | <=5.0% |
| Ash | <=5.0% |
| Heavy metals | Within the limits of the approved specification |
| Microbiological limits | Within the limits of the approved specification |
| Representative batch | LXFME260507 |
| Manufacture date | 7 May 2026 |
| Shelf life | Two years when stored properly |
Representative values do not replace the current shipment COA.
Buyer Decision Guide
Vitamin grades are specified by potency, carrier and purity, and the same vitamin name can cover several physical forms. Confirm the exact form and the analytical method before comparing quotations; overage and stability requirements are project-specific.
- Confirm the exact physical form and carrier
- Check declared potency and the assay method
- Review stability and overage needs for your format
- Confirm light, heat and oxygen sensitivity in handling
How This Grade Differs
Coenzyme Q10 must be compared on physical form, carrier and declared potency rather than on the vitamin name alone. Powder, oil, crystal and diluted forms behave differently in blending, dosing and shelf life.
Compare these related grades before approval:
For a substitution review, compare coenzyme Q10 identity and form, the 98.0%-101.0% HPLC assay, crystalline powder form and the current offered-batch COA.
Application Areas
- Vitamin premixes and dry blends
- Tablets, capsules and softgels
- Functional beverages and fortified foods
- Private-label nutrition projects
Packaging and Delivery
- Evaluation sample typically 10-20 g, subject to stock
- Regular MOQ typically 1 kg
- 1 kg foil bag or 25 kg fibre drum with inner food-grade liner
- Custom packing and private-label options subject to confirmation
- Typical lead time 7-15 working days after deposit
Quality and Documentation
Representative batch LXFME260507 supports the specification table above. Use the cited record for preliminary comparison and request the offered-lot COA for final technical approval. Batch COA, specification sheet, agreed third-party testing and export documents are available for buyer verification.
Frequently Asked Questions
What links the quotation to the delivered material?
The specification figure (98.0%-101.0%) and the batch number LXFME260507 carry through from quotation to certificate.
How long can we hold stock before use?
Two years when stored properly from the manufacture date when the pack stays sealed and dry.
What do you declare for moisture and ash?
Both are released against the limits on the approved specification; the measured result for your lot appears on its COA.
Which specification figure should the purchase order reference for Coenzyme Q10 Powder 98%?
The figure 98.0%-101.0%, measured by HPLC.
What physical form does Coenzyme Q10 Powder 98% ship in?
Fine yellow to orange crystalline powder, milled to 98% through 80 mesh.
What is the usual lead time?
Regular production normally takes 7-15 working days after deposit, depending on stock, volume, testing and customisation requirements.
What is the minimum order quantity?
The regular MOQ is typically 1 kg. An evaluation sample of 10-20 g can usually be arranged before a formal order, subject to stock.
Can I get a sample before placing the order?
Yes. An evaluation sample is normally available before a formal order. Sample quantity, courier account and destination are confirmed at the time of request.
Request COA, Sample or Quotation
Send your target specification, application, order quantity, destination country and required test limits.
Get the current batch COA, a sample or a quotation
